The 8th International Ice Drill Symposium

Material Package

Added Since

Include only attachments uploaded after this date

Include*

Everything

Specific sessions

Specific contributions

Specific days

Sessions*

Session 3

Session 6

Session 4

Session 1

Session 2

Session 5

Session 7

Excursion

Include materials from selected sessions

Contributions*

4-Inch Drill to Foro 400 Evolution (in session "Session 2")

A flexible and powerful shallow drilling winch even extended to a 4000 m logging winch (in session "Session 6")

A New Hot Water Drill System for Antarctic Ice Shelf Investigation (in session "Session 5")

A new Kevlar-armored cables for cable-suspended ice drills (in session "Session 4")

A New Smart System of Rapid Continuous Coring Drilling with Air Reverse Circulation in Antarctica (in session "Session 4")

A novel approach to process brittle ice for continuous flow analysis of stable water isotopes (in session "Session 4")

Agile Sub-Ice Geological Drill Development (in session "Session 2")

An enhanced percussion hammer mechanism for a subglacial sediment corer (in session "Session 2")

Analysis of Challenges Encountered in Deep-Hole Ice Drilling (in session "Session 3")

Antarctic movable drilling rig: General concept and test results (in session "Session 4")

Basic design for new electronics of the JARE deep drill and testing of the prototype (in session "Session 6")

Bench Tests of Mechanical Ice Core Drilling (in session "Session 7")

Cable communication through the winch conductor cables for the JARE deep ice core drill - Evaluation of RS485 serial communication using an experiment and a numerical simulation- (in session "Session 6")

Concept and testing of hot-water coring system with PDM-motor drive (in session "Session 2")

Control System Designs for Ice Coring Drills (in session "Session 7")

Core handling for the South Pole ice core (SPICEcore) project (in session "Session 2")

Deep Ice Core Drilling at EastGRIP, Greenland (in session "Session 4")

Deep subglacial access: an assessment of past hot water drilling failures and recent successes (in session "Session 1")

Design and analysis of a hydraulic tension sensor for ice drill and deep water applications (in session "Session 7")

Development of the Foro 3000 Deep Ice Core Drill (in session "Session 3")

DiElectric Profiling with rapid access drilling: in-situ DEP in the borehole (in session "Session 2")

Directional Drilling for Inclination Correction and Potential for Replicate Coring at EGRIP (in session "Session 5")

Dome A presentation (in session "Session 5")

Drill system for the third deep ice coring project around Dome Fuji, Antarctica (in session "Session 4")

Drill Tents (in session "Session 2")

Drilling the coldest firn (in session "Session 7")

Drilling the new 5G-5 branch hole at Vostok Station for collecting a replicate core of old meteoric ice (in session "Session 3")

Drilling the South Pole Ice Core (SPICEcore) (in session "Session 3")

EGRIP – a deep ice core drilling camp in Greenland: New concepts and new construction methods. (in session "Session 3")

EnEx-RANGE: A network of thermal drills for glacial exploration (in session "Session 2")

Enhancement of the BEAMISH hot water drill for clean subglacial access operations (in session "Session 4")

Estisol Drilling Fluid Handling and Recycling Using a Chips Melter at EGRIP, RECAP, and ABN-North Ice Core Drilling Projects (in session "Session 6")

Field-portable ice core saw (in session "Session 2")

Five drills across four decades: large-volume ice coring for atmospheric gas concentration and isotopic studies at the high-accumulation DE-08 site, Law Dome, Antarctica (in session "Session 4")

Glacial-bedrock interface drilling and sampling (in session "Session 2")

Greenland deep boreholes inform on sliding and deformation of the basal ice (in session "Session 1")

High resolution in situ density profiling of snow-firn-ice sequences. (in session "Session 2")

High-technology reels and hoses for deep hot-water drilling in ice (in session "Session 4")

Hot water drill and borhole measurment . Argentière glacier Alpes (in session "Session 4")

HOTROD: Prototype melt-tip for rapid ice-sheet drilling (in session "Session 2")

Ice core drilling complications: shallow dry hole electromechanical ice coring. (in session "Session 4")

IDP Hot Water Drills (in session "Session 2")

IDP Rock Coring Drills (in session "Session 4")

Impurities effect on borehole closure rate in ice sheet (in session "Session 2")

Multifunctional logger with microelectromechanical measuring systems for logging of the deep boreholes in Antarctic and Greenland ice sheets (in session "Session 2")

New capability to recover intermediate depth cores from the sea floor beneath floating ice platforms (in session "Session 5")

Optical Cryobots and Other Novel Methods for Deep Ice Penetration (in session "Session 7")

Optimization of Drill Head Structure and Drilling Parameters of Hot-Water Ice-Coring Drill (in session "Session 1")

P-RAID: a bottom-of-the-hole subglacial bedrock sampler (in session "Session 4")

Passive Replicate Coring Concept for Ice Coring Drills (in session "Session 2")

Penetration Technology for Investigation of Subglacial Lake Vostok (in session "Session 3")

Preliminary Studies on Melting Cutting and Coring Ice by Using Laser for Ice Drilling (in session "Session 7")

Programmable deployed borehole measurement system for hot water drilled ice holes (in session "Session 5")

Prototype Ice Well (in session "Session 2")

Rapid Air Movement Drill Upgrade (in session "Session 4")

Rapid intermediate depth ice sampling with electromechanical coring drill. (in session "Session 6")

RECAS autonomous thermal sonde for subglacial lakes exploration (in session "Session 5")

Recoverable autonomous thermal sonde for subglacial lakes exploration: electronic control system design (in session "Session 7")

Recoverable autonomous thermal sonde for subglacial lakes exploration: heating control system design (in session "Session 7")

ROV-mountable underwater thermal corer: General concept (in session "Session 2")

Searching for the oldest ice in Antarctica using RES method: Review and Chinese contribution (in session "Session 4")

Self-contained and portable thermal ice drilling system (in session "Session 4")

Shallow depth lightweight ice coring: progress and new developments. (in session "Session 6")

Shallow ice core drillings at South East Dome, Greenland in 2015 and 2020. (in session "Session 4")

Side-wall ice corer (in session "Session 2")

SLUSH: Hybrid electromechanical-thermal drilling system for penetration of Europa ice (in session "Session 7")

Sub-glacial Drilling at Pirrit Hills, Antarctica (in session "Session 1")

Sub-glacial Drilling using the IDP Winkie Drill (in session "Session 2")

subglacior drilling probe : lesson learn (in session "Session 1")

System architecture of the upcoming BE-OI ice-coring-drill drive-chain (in session "Session 6")

Temperature distribution in ice around thermally drilled borehole (in session "Session 2")

The BAS Rapid Access Isotope Drill, a new lightweight ice sheet reconnaissance tool. (in session "Session 4")

The BEAMISH hot water drill (in session "Session 1")

The brittle ice zone in polar ice cores (in session "Session 2")

The development of portable hot-point drill and measurement of 10-m depth snow temperature at Zhongshan Station – Dome A profile (in session "Session 2")

The development of the RADIX rapid access drilling system (in session "Session 4")

The five category approach for recommissioning equipment from extended storage. (in session "Session 4")

The Skytrain ice core drilling project (in session "Session 3")

TRIPLE-IceCraft - A retrievable melting probe for transporting scientific payloads (in session "Session 4")

University of Copenhagen Ice Core Drilling Operations Since 2013 and Future Outlook (in session "Session 2")

Using Distributed Temperature Sensing to measure borehole temperature. (in session "Session 4")

Vertical stabilization and drilling trajectory of RECAS-200 thermal sonde (in session "Session 2")

Vibrocorer for Sampling of Subglacial Sediments in Antarctica (in session "Session 5")

Welcome (in session "Session 1")

Wet drilling with a modified 82mm ECLIPSE drill (in session "Session 4")

Include materials from selected contributions

Events scheduled on*

30/09/2019

01/10/2019

02/10/2019

03/10/2019

Include materials from sessions/contributions scheduled on the selected dates