Name: The 8th International Ice Drill Symposium
Start: 2019-09-30T09:00:00+02:00
End: 2019-10-03T19:00:00+02:00
Location: The Royal Danish Academy of Sciences and Letters

The 8th International Ice Drill Symposium

from Monday, 30 September 2019 (09:00) to Thursday, 3 October 2019 (19:00)

Monday, 30 September 2019
09:00 Session
Session
09:00 - 12:00
Contributions

09:00 Welcome - Dorthe Dahl-Jensen (co-chair) Steffen Bo Hansen (Co-chair)

09:20 The BEAMISH hot water drill - Paul Anker (British Antarctic Survey)

09:40 Deep subglacial access: an assessment of past hot water drilling failures and recent successes - Keith Makinson (British Antarctic Survey)

10:40 Greenland deep boreholes inform on sliding and deformation of the basal ice - Dorthe Dahl-Jensen (University of Copenhagen)

11:00 Optimization of Drill Head Structure and Drilling Parameters of Hot-Water Ice-Coring Drill - Rusheng Wang (Polar Research Center at Jilin University, China)

11:20 subglacior drilling probe : lesson learn - olivier alemany (IGE - CNRS)

11:40 Sub-glacial Drilling at Pirrit Hills, Antarctica - Tanner Kuhl (University of Wisconsin-Madison)
12:00 Lunch
Lunch
12:00 - 13:00
13:00
13:00 - 17:00
Contributions

13:00 University of Copenhagen Ice Core Drilling Operations Since 2013 and Future Outlook - Copenhagen Drill Group (Niels Bohr Institute)

13:20 Glacial-bedrock interface drilling and sampling - Victor Zagorodnov (Polar Research Center, Jilin University, Changchun, China)

13:40 The brittle ice zone in polar ice cores - Peter D. Neff (University of Washington)

14:00 Agile Sub-Ice Geological Drill Development - Christopher Gibson (University of Wisconsin-Madison)

14:20 ROV-mountable underwater thermal corer: General concept - Yang Yang (Polar Research Center, Jilin University)

14:40 Sub-glacial Drilling using the IDP Winkie Drill - Grant Boeckmann (University of Wisconsin-Madison)

15:40 Vertical stabilization and drilling trajectory of RECAS-200 thermal sonde - Bing Li (Polar Research Center, Jilin University)

16:00 HOTROD: Prototype melt-tip for rapid ice-sheet drilling - William Colgan (GEUS)

16:20 The development of portable hot-point drill and measurement of 10-m depth snow temperature at Zhongshan Station – Dome A profile - Xiaopeng Fan (Polar Research Center, Jilin University, Changchun, China)

16:40 EnEx-RANGE: A network of thermal drills for glacial exploration - Dirk Heinen (III. Physikalisches Institut, RWTH Aachen University, Germany)
17:00 Poster Session I
Poster Session I
17:00 - 18:20
Contributions

17:00 Multifunctional logger with microelectromechanical measuring systems for logging of the deep boreholes in Antarctic and Greenland ice sheets - Pavel Talalay

17:04 High resolution in situ density profiling of snow-firn-ice sequences. - Victor Zagorodnov (Cryosphere research solutions llc)

17:08 Field-portable ice core saw - Erik Blake (Icefield Instruments Inc.)

17:12 IDP Hot Water Drills - Christopher Gibson (University of Wisconsin-Madison)

17:16 Prototype Ice Well - Christopher Gibson (University of Wisconsin-Madison)

17:20 Temperature distribution in ice around thermally drilled borehole - Xiao Li (Polar Research Center, Jilin University, Changchun, China)

17:24 Passive Replicate Coring Concept for Ice Coring Drills - Jay Johnson (University of Wisconsin-Madison)

17:28 Core handling for the South Pole ice core (SPICEcore) project - Joseph Souney (University of New Hampshire)

17:32 Drill Tents - Tanner Kuhl (University of Wisconsin-Madison)

17:36 4-Inch Drill to Foro 400 Evolution - Jay Johnson (University of Wisconsin-Madison)

17:40 Side-wall ice corer - Pavel Talalay (Jilin University)

17:44 An enhanced percussion hammer mechanism for a subglacial sediment corer - Keith Makinson (British Antarctic Survey)

17:48 DiElectric Profiling with rapid access drilling: in-situ DEP in the borehole - Frank Wilhelms (Alfred-Wegener-Institut, Helmholtz-Zentrum für Polar- und Meeresforschung & Department of Crystallography, Geoscience Centre, University of Göttingen)

17:52 Concept and testing of hot-water coring system with PDM-motor drive - Yang Yang (Polar Research Center, Jilin University)

17:56 Impurities effect on borehole closure rate in ice sheet - Jialin HONG (Polar Research Center, Jilin University, Changchun, China)
Tuesday, 1 October 2019
09:00
09:00 - 12:00
Contributions

09:00 Drilling the new 5G-5 branch hole at Vostok Station for collecting a replicate core of old meteoric ice - Alexey Turkeev (Arctic and Antarctic Research Institute)

09:20 Analysis of Challenges Encountered in Deep-Hole Ice Drilling - Dmitrii Vasilev (Saint-Petersburg Mining University)

09:40 Drilling the South Pole Ice Core (SPICEcore) - Jay Johnson (University of Wisconsin - Madison)

10:40 EGRIP – a deep ice core drilling camp in Greenland: New concepts and new construction methods. - Joergen Peder Steffensen (Physics of Ice Climate and Earth, Niels Bohr Institute, Univ. of Copenhagen)

11:00 Penetration Technology for Investigation of Subglacial Lake Vostok - Dmitrii Vasilev (Saint-Petersburg Mining University)

11:20 Development of the Foro 3000 Deep Ice Core Drill - Jay Johnson (University of Wisconsin-Madison)

11:40 The Skytrain ice core drilling project - Julius Rix (The British Antarctic Survey)
12:00 Lunch
Lunch
12:00 - 13:00
13:00
13:00 - 17:20
Contributions

13:00 Deep Ice Core Drilling at EastGRIP, Greenland - Copenhagen Drill Group (Niels Bohr Institute)

13:20 Wet drilling with a modified 82mm ECLIPSE drill - E Blake (Icefield Instruments Inc.)

13:40 P-RAID: a bottom-of-the-hole subglacial bedrock sampler - Ryan Timoney (University of Glasgow)

14:00 Drill system for the third deep ice coring project around Dome Fuji, Antarctica - Hideaki Motoyama (National Institute of Polar Research/SOKENDAI, Japan)

14:20 Antarctic movable drilling rig: General concept and test results - Pavel Talalay (Polar Research Center, Jilin University, Changchun, China)

14:40 Five drills across four decades: large-volume ice coring for atmospheric gas concentration and isotopic studies at the high-accumulation DE-08 site, Law Dome, Antarctica - Peter D. Neff (University of Washington) Tanner Kuhl (University of Wisconsin)

15:40 Shallow ice core drillings at South East Dome, Greenland in 2015 and 2020. - Sumito Matoba (Institute of Low Temperature Science, Hokkaido University)

16:00 A New Smart System of Rapid Continuous Coring Drilling with Air Reverse Circulation in Antarctica - Rusheng Wang (Polar Research Center at Jilin University)

16:20 The development of the RADIX rapid access drilling system - Jakob Schwander (University of Bern)

16:40 The BAS Rapid Access Isotope Drill, a new lightweight ice sheet reconnaissance tool. - Julius Rix (The British Antarctic Survey)

17:00 Rapid Air Movement Drill Upgrade - Christopher Gibson (University of Wisconsin-Madison)
17:20 Poster Session II
Poster Session II
17:20 - 18:20
Contributions

17:20 High-technology reels and hoses for deep hot-water drilling in ice - Pavel Talalay (Polar Research Center, Jilin University)

17:24 Searching for the oldest ice in Antarctica using RES method: Review and Chinese contribution - Cui Xiangbin (Polar Research Institute of China, Shanghai, China)

17:28 A novel approach to process brittle ice for continuous flow analysis of stable water isotopes - Rebecca Pyne (GNS Science)

17:32 Hot water drill and borhole measurment . Argentière glacier Alpes - luc piard (cnrs)

17:44 Ice core drilling complications: shallow dry hole electromechanical ice coring. - Victor Zagorodnov (Cryosphere research solutions llc)

17:48 Using Distributed Temperature Sensing to measure borehole temperature. - Julius Rix (The British Antarctic Survey)

17:52 A new Kevlar-armored cables for cable-suspended ice drills - Nan Zhang (Polar Research Center, Jilin University, Changchun, China)

17:56 Enhancement of the BEAMISH hot water drill for clean subglacial access operations - Paul Anker (British Antarctic Survey)

18:00 Self-contained and portable thermal ice drilling system - Marco Feldmann (GSI GmbH, Aachen)

18:04 TRIPLE-IceCraft - A retrievable melting probe for transporting scientific payloads - Dirk Heinen (RWTH Aachen University, Germany)

18:08 IDP Rock Coring Drills - Grant Boeckmann (University of Wisconsin-Madison)

18:12 The five category approach for recommissioning equipment from extended storage. - Dennis Duling (PSL lab, University of Wisconsin)
Wednesday, 2 October 2019
09:00
09:00 - 12:00
Contributions

09:00 Directional Drilling for Inclination Correction and Potential for Replicate Coring at EGRIP - Copenhagen Drill Group (Niels Bohr Institute)

09:20 Programmable deployed borehole measurement system for hot water drilled ice holes - Carson McAfee (BAS)

09:40 A New Hot Water Drill System for Antarctic Ice Shelf Investigation - Yuansheng Li (Polar Research Institute of China, Shanghai, China)

10:40 RECAS autonomous thermal sonde for subglacial lakes exploration - Youhong Sun (1 Jilin University; 2 China University of Geosciences)

11:00 Vibrocorer for Sampling of Subglacial Sediments in Antarctica - Da Gong (Jilin University, Polar Research Center)

11:20 New capability to recover intermediate depth cores from the sea floor beneath floating ice platforms - Alex Pyne (Victoria University of Wellington)

11:40 Dome A presentation - Pavel Talalay (Jilin University)
12:00 Lunch
Lunch
12:00 - 13:00

13:00

13:00 - 21:50
Thursday, 3 October 2019
09:00
09:00 - 12:00
Contributions

09:00 Shallow depth lightweight ice coring: progress and new developments. - Victor Zagorodnov (Cryosphere Research Solutions LLC, Columbus, OH, USA)

09:20 Rapid intermediate depth ice sampling with electromechanical coring drill. - Victor Zagorodnov (Cryosphere Research Solutions LLC, Columbus, OH, USA)

09:40 Basic design for new electronics of the JARE deep drill and testing of the prototype - Morimasa Takata (Nagaoka University of Technology)

10:40 Cable communication through the winch conductor cables for the JARE deep ice core drill - Evaluation of RS485 serial communication using an experiment and a numerical simulation- - Morimasa Takata (Nagaoka University of Technology)

11:00 System architecture of the upcoming BE-OI ice-coring-drill drive-chain - Matthias Hüther (Alfred Wegener Institute for Polar and Marine Research) Josef Lehmann (Cipunet®)

11:20 A flexible and powerful shallow drilling winch even extended to a 4000 m logging winch - Jan Tell

11:40 Estisol Drilling Fluid Handling and Recycling Using a Chips Melter at EGRIP, RECAP, and ABN-North Ice Core Drilling Projects - Copenhagen Drill Group (Niels Bohr Institute)
12:00 Lunch
Lunch
12:00 - 13:00
13:00
13:00 - 16:40
Contributions

13:00 Drilling the coldest firn - Sepp Kipfstuhl (AWI)

13:20 Control System Designs for Ice Coring Drills - Jay Johnson (University of Wisconsin-Madison)

13:40 Recoverable autonomous thermal sonde for subglacial lakes exploration: heating control system design - Haibin Yu (Hangzhou Dianzi University) Chong Li (Hangzhou Dianzi University) Shilin Peng (Hangzhou Dianzi University)

14:00 Bench Tests of Mechanical Ice Core Drilling - Alexey Turkeev (Arctic and Antarctic Research Institute)

14:20 Design and analysis of a hydraulic tension sensor for ice drill and deep water applications - Jianguang Shi Shilin Peng (Hangzhou Dianzi University) Haibin Yu (Hangzhou Dianzi University)

14:40 SLUSH: Hybrid electromechanical-thermal drilling system for penetration of Europa ice - Boleslaw Mellerowicz (Honeybee Robotics) Kris Zacny (Honeybee Robotics) Joseph Palmowski (Honeybee Robotics) Gale Paulsen (Honeybee Robotics)

15:40 Preliminary Studies on Melting Cutting and Coring Ice by Using Laser for Ice Drilling - Nan Zhang (Polar Research Center, Jilin University, Changchun, China)

16:00 Optical Cryobots and Other Novel Methods for Deep Ice Penetration - Tanner Neal (Stone Aerospace)

16:20 Recoverable autonomous thermal sonde for subglacial lakes exploration: electronic control system design - Shilin Peng (Hangzhou Dianzi University) Jianguang Shi (Hangzhou Dianzi University) Haibin Yu (Hangzhou Dianzi University)
16:40 Discussion
Discussion
16:40 - 19:00